Since the introduction of the FFTube, this model has been widely used on machines from 3 to 100 tons. The system is characterized by its compact size in combination with the high filter capacity. Part of the technique used comes from the FF MultiBox. For example, the FFTube sucks the air against the force of gravity through the filter medium, which considerably prolongs the life of the filters. The dirt can also fall out of the unit due to vibrations of the machine.
The round filters ensure that these can not possibly be placed incorrectly. The air is distributed 100% proportionally over the filter, and preferential air flows are a thing of the past. The single radial blower in the unit makes less noise compared to other units because the speed is lower at the same air output. The most important feature of the FFTube is its compact size.
Machines are compacted and that has the downside that an overpressure system is less easy to install. The FFTube can be mounted on almost all machines without any expensive subframe; the unit is only 350mm in diameter with a height of 420mm, and can filter up to P3 / HEPA level in combination with 3.3 Kg. Kool! Should the remediation be a carbon filter of 10 Kg. require the unit to be optionally equipped with a high cap. This cap can be placed on the base of the FFTube, and can be changed without tools.
|Size||Diam.: 350mm. Height: leeg 140mm, P1/P3 filter 420mm, P1/P3/Active-Carbon 830mm|
|Voltage||12 of 24Volt @ 60 Watt|
|Controlling||FFController, PPM measuring optional|
|Filtercapacity||P1, P3, 3,3 en 10Kg Active-Carbon A(BEKHg)|